![]() |
| For more than 30 years Comat has
been a name synonymous with the highest quality of product. With its first-class
time-delay relay the Comat programme enjoys outstanding respect worldwide
and is market leader in Switzerland. Considerable value is placed upon a customer advisory service, which is appropriate to the application in question, and, being a further quality feature, this is among the factors contributing to the success of our firm. The basic principle applies that the products should always result in optimum customer usage. Monitoring equipment for voltage, current, three-phase mains with phase-sequence, phase-sequence, earth-leakage- and winding temperature as well as a comprehensive programme of industrial-, interface- and installation relays round off the range of our own products on offer. All our own products are continually being re-designed and kept up to date in accordance with the most recent state-of–the-art technology. In so doing the most important thing is not necessarily the use of the latest technologies but the reliability and long service life of proven technologies. The Quality Management System, which complies with ISO 9001:2000, together with the 100 percentage end control, following the preceding 24 hour “burn-in test”, are guarantees for the quality of our products and their high service life, which is above average. The commercial products supplied by Comat AG are also subject to strict controls and have to fulfil the same quality demands as our own products. As a result Comat only includes products from internationally renowned manufacturers in its sales’ programme. It goes without saying that a comprehensive technical customer advisory service is also guaranteed for the commercial products. Apart from standard products, Comat also develops equipment for customer-specific applications. |
||||
| CONTROL TECHNOLOGY | ||||
| Comat | Since 1970 | |||
| - Multifunction, DIN, Plug-in, Time Cube | ||||
| Relays | Comat, Releco | Since 1976 | ||
| - Industrial-, Interface-, and Installation Relays | ||||
| Miniature Contactors | Comat | Since 2003 | ||
| - Miniature Contactors and Power Relays | ||||
| Monitoring Relays | Comat | Since 1972 | ||
| - Voltage-. Current-, Three-Phase-, Phase sequence-, Thermo Protection- Relays | ||||
| Remote controlling and monitoring | Comat | Since 2006 | ||
| - Comat SMS Relay | ||||
| Controller | Comat | Since 2003 | ||
| - 10 or 20 I/O with Voice Message over Telephone network | ||||
| Power Electronics | IC-Electronic | Since 1996 | ||
| - Motorcontroller, Solid State Contactor | ||||
| LED | Comat | Since 2003 | ||
| - Signal lamps | ||||
| SENSOR TECHNOLOGY | ||||
| Sensors | Turck | Since 1970 | ||
| - Inductive-, Capacitive-, Ultra sonic | ||||
| Photoelectric Sensors | Banner | Since 1996 | ||
| - Barriers-, Light Curtains | ||||
| AUTOMATION | ||||
| Interfacetechnic | Turck | Since 1976 | ||
| - Switching Amplifiers, Signal Separator, Coupler | ||||
| Interfacetechnic | PR electronics | Since 2003 | ||
| - Temperature, Signal Converter, Signal Isolator | ||||
| PLC with Graphic Displays | Unitronics | Since 2003 | ||
| - Graphic Display & Control Panel, GSM-Monitoring | ||||
| PRESSURE, TEMPERATURE | ||||
| GE Druck | Since 1981 | |||
| - Relative- /Absolute-/Differencial Pressure, Low Pressure | ||||
| Field Calibrators | GE Druck | Since 1994 | ||
| - Pressure, mA/mV/V/Ohm/Hz/RTD/TC, Dry Block Cells | ||||
| Primary-/ Transferstandards | GE Druck GE Ruska GE Pressurements |
Since 1997 | ||
| - Pressure Standard, Pressure Calibrators | ||||
| Aviation Ground Support Equipment | Druck | Since 1997 | ||
| - Air Data Test Sytems (ADTSxxx), Leak Tester | ||||
| CALIBRATION | ||||
| Calibration Laboratory SCS 072 | Comat | Since 1996 | ||
- Pressure (0......1000bar), Electrical
Parameters DC (mA,/A/mV/V/ |
||||
[Top] |
||||